home
***
CD-ROM
|
disk
|
FTP
|
other
***
search
/
Amiga Plus 1995 #5 & #6
/
Amiga Plus CD - 1995 - No. 5 and 6.iso
/
pd
/
grafik
/
lightwave
/
lightwave-jan95
/
000175_owner-lightwave-l _Thu Jan 19 02:31:16 1995.msg
< prev
next >
Wrap
Text File
|
1995-02-04
|
2KB
|
39 lines
Return-Path: <owner-lightwave-l>
Received: by netcom16.netcom.com (8.6.9/Netcom)
id AAA00938; Thu, 19 Jan 1995 00:59:32 -0800
Received: from ibmmail.COM by netcom16.netcom.com (8.6.9/Netcom)
id AAA00914; Thu, 19 Jan 1995 00:59:23 -0800
From: gblpcsjc@ibmmail.com
Message-Id: <199501190859.AAA00914@netcom16.netcom.com>
Received: from IBMMAIL.COM by ibmmail.COM (IBM VM SMTP V2R3) with BSMTP id 0015;
Mon, 16 Jan 95 08:07:22 EST
Date: Mon, 16 Jan 1995 08:07:17 EST
To: lightwave-l@netcom.com
MIME-Version: 1.0
Content-Type: text/plain; charset=US-ASCII
Content-Transfer-Encoding: 7bit
Sender: owner-lightwave-l@netcom.com
Precedence: bulk
Re: Motion paths
Steve Warner has nearly got it solved. The method I use (which I
learnt from Lee Stranahan's "Modeler Part 2" video) is to build
the motion path in Layout, rather than Modeler.
You need two versions of the path. The first one has ALIGN TO
PATH enabled - this is the path the camera (or car, or whatever)
will use in the finished animation.
The second version of the path has ALIGN TO PATH turned off.
When you build the second path, you will need to manually align
the object at each keyframe. When you're happy with it, save it
off. Then use this second path to do the extrude. Obviously you
will need to PATH EXTRUDE rather than RAIL EXTRUDE.
Steve Criddle